ALL-File

BlueM.Sim | Downloads | Application | Theory | Development

Input files · ALL SYS · FKT KTR · EXT JGG WGG TGG · TAL HYA TRS EIN URB VER RUE BEK EZG FKA · BOA BOD LNZ EFL · DIF

---

General Information

Datei

*Allgemeine Angaben (*.ALL)
*==========================

 Bezeichnung.....................: Speicherbewirtschaftung

*Hauptueberschriften:
*--------------------
................................:
................................:
................................:

*Simulations-Zeitraum:
*---------------------             TT.MM.JJJJ hh:mm - TT.MM.JJJJ hh:mm
 SimBeginn - SimEnde ............: 01.11.1979 08:00 - 31.10.1980 08:00

*Zeitschritt:
*------------
 Zeitschrittlaenge [min] ........: 30
 Zeitschritt Monat = M ..........:

*Anfangsbedingungen:
*-------------------
 Muldenverluste [mm] ............: 1
 Anfangsverlust [%] .............: 100
 Gerinneabfluss [% von MQ] ......: 100
 Anfangsbeckenfuellung [%] ......: 100
 Anfangsbodenfeuchte [%] ........: 100

*Simulationsoptionen:
*-------------------
 Kontrollfunktionen ...... [J/N] : N
 Berechnung Zielfunktion   [J/N] : N

*Berechnungsparameter:
*--------------------
 Exponent Abweichungen Sollwert .: 0
 Fehlerabweichung am Pegel [%] ..: 0
 Fehlerabweichung Zielfkt. [%] ..: 0

*Ausgabeoptionen:
*---------------
 Ausgabe Maximalereignisse [J/N] : N
 Bilanzausgabe ........... [J/N] : N
 ... Wahrscheinlichkeiten  [J/N] : N
 Ganglinienausgabe ....... [J/N] : J
 ... CSV-Format .......... [J/N] : J
 ... Binaerausgabe ....... [J/N] : N
 Animation ............... [J/N] : N

*DiffQuellen:
*-------------
 Berechnung .....................: 0
 Anzahl Stoffe ..................: 0

*Erw. Ausgabeoptionen:
*-------------
 EFL-Wellenausgabe (LEFLWELOUT). : N
 EFL-Bodenkennwerte (LEFLOUT)... : N
 DIF-Testausgabe (LDIFOUT) ..... : N
 Protokollausgabe (LLOGOUT) .... : N
 LTSTOUT ....................... : N
 LBFFKT ........................ : N
 LBFOUT ........................ : N

*Beschreibung:
*-------------

Translations

In this section you will find the English translation of the German wording used in the example All-File.An Explanation of some of the options can be found in the section Explanations of this page.

Bezeichnung

• Bezeichnung....: Speicherbewirtschaftung is characterization...: reservoir management

Simulations-Zeitraum

• Simulations-Zeitraum is the Simulation-period
• the date-format needed is day.month.year hour:minute - day.month.year hour:minute

Zeitschritt

• Zeitschritt is the time step

Anfangsbedingungen

• Anfangsbedingungen are the initial conditions

Simulationsoptionen

• Simulationsoptionen are the simulation options

Berechnungsparameter

• Berechnungsparameter are the simulations parameters

Ausgabeoptionen

• Ausgabeoptionen are the output options

DiffQuellen

• DiffQuellen is an abbreviation of diffuse Quellen and refers to the diffuse sources

Erw. Ausgabeoptionen

• Erw. Ausgabeoptionen are extended output options

Explanations

Time step

• Time step duration [min]:

A Value between 1 and 43200 (= 30 days)

• Time step month = M:

If M is chosen here, the time step duration [min] will be ignored and a (variable) time step of exactly one month will be utilized, which begins at the first of a month and ends with the first of the following month .

Initial conditions

• losses due to depression storage [mm]:

depression storage losses of impervious areas (for further information go to Theory:Surface water reservoirs (fraction of impervious area))

• initial reservoir content [%]:

Refers to the BEK-File, which contains the stormwater overflow tanks as well as the rain-water retention basins of the urban drainage system. The initial reservoir content of a dam is configured in the TAL-File.

• initial soil moisture:

Global initial soil moisture, which will be used as the initial soil moisture of each individual HRU Catchments.

Output options

• ... Probabilities [Y/N]:

If activated a file will be created containing the probability distribution of the results(PRB-Datei). However this file will only be created for elements for which both the output of the hydrograph and the output of the balance has been activated (refer to SYS-File).

• ... CSV-Format [Y/N]:

By enabling this option the values in the result-files (WEL and KWL-Files) will be separated by semicolons. This is very useful for Excel!

Extended output options

• HRU-Discharge wave output (LEFLWELOUT). :

Creates a EFL.WEL-File containing a detailed discharge wave (including soil moisture) for individual HRUs (this option must be enabled for desired HRUs in the EFL-File!)

• HRU-Soil parameters (LEFLOUT)... :

Writes the mean soil parameters of the three calculation horizons for each HRU into a EFL.TXT-File

• DIF-Test output (LDIFOUT) ..... :

Creates a debug-report for the calculation including diffuse sources

• Protokollausgabe (LLOGOUT) .... :

Log protocol output ($LOG.TXT)

• LTSTOUT ....................... :

(Control) output of each step of the simulation ( which step was completed? Which function was called?)

• LBFFKT ........................ :

Output of soil funtions for each time increment

• LBFOUT ........................ :

Old debug-output for soil moisture, contained and improved in LEFLWELOUT and LEFLOUT