ALL-File

BlueM.Sim | Download | Application | Theory | Development

Input files · ALL SYS · FKT KTR · EXT JGG WGG TGG · TAL HYA TRS EIN URB VER RUE BEK EZG FKA · BOA BOD LNZ EFL · DIF

General Information

Datei

*Allgemeine Angaben (*.ALL)
*==========================

 Bezeichnung.....................: Speicherbewirtschaftung

*Hauptueberschriften:
*--------------------
................................:
................................:
................................:

*Simulations-Zeitraum:
*---------------------             TT.MM.JJJJ hh:mm - TT.MM.JJJJ hh:mm
 SimBeginn - SimEnde ............: 01.11.1979 08:00 - 31.10.1980 08:00

*Zeitschritt:
*------------
 Zeitschrittlaenge [min] ........: 30
 Zeitschritt Monat = M ..........:

*Anfangsbedingungen:
*-------------------
 Muldenverluste [mm] ............: 1
 Anfangsverlust [%] .............: 100
 Gerinneabfluss [% von MQ] ......: 100
 Anfangsbeckenfuellung [%] ......: 100
 Anfangsbodenfeuchte [%] ........: 100

*Simulationsoptionen:
*-------------------
 Kontrollfunktionen ...... [J/N] : N
 Berechnung Zielfunktion   [J/N] : N

*Berechnungsparameter:
*--------------------
 Exponent Abweichungen Sollwert .: 0
 Fehlerabweichung am Pegel [%] ..: 0
 Fehlerabweichung Zielfkt. [%] ..: 0

*Ausgabeoptionen:
*---------------
 Ausgabe Maximalereignisse [J/N] : N
 Bilanzausgabe ........... [J/N] : N
 ... Wahrscheinlichkeiten  [J/N] : N
 Ganglinienausgabe ....... [J/N] : J
 ... CSV-Format .......... [J/N] : J
 ... Binaerausgabe ....... [J/N] : N
 Animation ............... [J/N] : N

*DiffQuellen:
*-------------
 Berechnung .....................: 0
 Anzahl Stoffe ..................: 0

*Erw. Ausgabeoptionen:
*-------------
 EFL-Wellenausgabe (LEFLWELOUT). : N
 EFL-Bodenkennwerte (LEFLOUT)... : N
 DIF-Testausgabe (LDIFOUT) ..... : N
 Protokollausgabe (LLOGOUT) .... : N
 LTSTOUT ....................... : N
 LBFFKT ........................ : N
 LBFOUT ........................ : N

*Beschreibung:
*-------------

Translations

In this section you will find the English translation of the German wording used in the example All-File.An Explanation of some of the options can be found in the section Explanations of this page.

Bezeichnung

Bezeichnung....: Speicherbewirtschaftung is characterization...: reservoir management

Simulations-Zeitraum

Simulations-Zeitraum is the Simulation-period
the date-format needed is day.month.year hour:minute - day.month.year hour:minute

Zeitschritt

Zeitschritt is the time step

Anfangsbedingungen

Anfangsbedingungen are the initial conditions

Simulationsoptionen

Simulationsoptionen are the simulation options

Berechnungsparameter

Berechnungsparameter are the simulations parameters

Ausgabeoptionen

Ausgabeoptionen are the output options

DiffQuellen

DiffQuellen is an abbreviation of diffuse Quellen and refers to the diffuse sources

Erw. Ausgabeoptionen

Erw. Ausgabeoptionen are extended output options

Explanations

Time step

Time step duration [min]:

A Value between 1 and 43200 (= 30 days)

Time step month = M:

If M is chosen here, the time step duration [min] will be ignored and a (variable) time step of exactly one month will be utilized, which begins at the first of a month and ends with the first of the following month .

Initial conditions

losses due to depression storage [mm]:

depression storage losses of impervious areas (for further information go to Theory:Surface water reservoirs (fraction of impervious area))

initial reservoir content [%]:

Refers to the BEK-File, which contains the stormwater overflow tanks as well as the rain-water retention basins of the urban drainage system. The initial reservoir content of a dam is configured in the TAL-File.

initial soil moisture:

Global initial soil moisture, which will be used as the initial soil moisture of each individual HRU Catchments.

Output options

... Probabilities [Y/N]:

If activated a file will be created containing the probability distribution of the results(PRB-Datei). However this file will only be created for elements for which both the output of the hydrograph and the output of the balance has been activated (refer to SYS-File).

... CSV-Format [Y/N]:

By enabling this option the values in the result-files (WEL and KWL-Files) will be separated by semicolons. This is very useful for Excel!

Extended output options

HRU-Discharge wave output (LEFLWELOUT). :

Creates a EFL.WEL-File containing a detailed discharge wave (including soil moisture) for individual HRUs (this option must be enabled for desired HRUs in the EFL-File!)

HRU-Soil parameters (LEFLOUT)... :

Writes the mean soil parameters of the three calculation horizons for each HRU into a EFL.TXT-File

DIF-Test output (LDIFOUT) ..... :

Creates a debug-report for the calculation including diffuse sources

Protokollausgabe (LLOGOUT) .... :

Log protocol output ($LOG.TXT)

LTSTOUT ....................... :

(Control) output of each step of the simulation ( which step was completed? Which function was called?)

LBFFKT ........................ :

Output of soil funtions for each time increment

LBFOUT ........................ :

Old debug-output for soil moisture, contained and improved in LEFLWELOUT and LEFLOUT