EXT-File

BlueM.Sim | Download | Application | Theory | Development

Input files · ALL SYS · FKT KTR · EXT JGG WGG TGG · TAL HYA TRS EIN URB VER RUE BEK EZG FKA · BOA BOD LNZ EFL · DIF

---

Time series

also refer to Theory: time series management

File

*Zeitreihen (*.EXT)
*==================
*
*|-----|------|-----|----------------------------------------------------------------------------------|
*|Datei| Einh |Intrp| Pfad zur Zeitreihendatei                                                         |Bezeichnung
*| Nr. |      |     |                                                                                  |
*|-<->-|-<-->-|-<->-|-<--------1---------2---------3---------4---------5---------6---------7--------->-|
 |  A  |   B  |  C  | D                                                                                |     E
*|-----|------|-----|----------------------------------------------------------------------------------|

Kann es sein, dass Verdunstungszeitreihen nur mit Tagessummenwerten angegeben werden dürfen? Denn in der EZG_WEL wird dem Wert aus der Zeitreihe ein Tagesgang überprägt. MB

Hint

The *.EXT-File exported by TALSIM has a different format, than the format required by BlueM! Refer to TALSIM Export on how to convert it.

Explanations

• A: unique file number
• B: Unit (see below)
• C: Interpretation (see below)
• D: absolute or relative path to the time series file.
  BIN- as well as ZRE-Files are accepted.ZRE-Files are converted to BIN-Files automatically before the simulation begins. Attention: During the conversion into the BIN-Format the units are changed (refer to ZRE_SYS in MODZRE). However an automatic reverse conversion is done in the code,if necessary.

 
m3/s, M3/S -> m3/s      [Factor = 1.]
l/s, L/S   -> m3/s 1    [Factor = 1.]
mm, MM     -> m3/(s ha) [Factor = 10. / REAL(izschr)]
muem, MUEM ->  ??       [Factor = 1. / (REAL(izschr) * 100.)]
mm/h, MM/H -> m3/(s ha) [Factor = 10. / 3600.]
mm/d, MM/D -> m3/(s ha) [Factor = 10. / 86400.]
m/s, M/S   -> ??        [Factor = 10000.]
°C         -> °C        [Factor = 1.]

• E: Description

Unit

The following units are recognized by BlueM:

• m3/s
• l/s
• mm
• muem (adjustment factor zranp = 1. / (REAL(izschr) * 100.), possibly means Thsd.m³, refer to MODZRE, as of line 6172 (Rev 71))
• mm/h
• mm/d
• m/s
• °C

Interpretation

File:Theorie Abb52.gif

Interpretation of time series

The following interpretations are possible:

• 1: momentary measured value (e.g. discharge)
• 2: Block right, measured value left (standard value)
• 3: Block left, measured value right
• 4: cumulative curve
• 5: cumulative curve per time step (e.g. precipitation)

Attention:
Block right and Block left only work correctly for an intensity (e.g. [mm/h])!
Cumulative curve per time step only works correctly for heights (e.g. [mm])!