HYA-File: Difference between revisions
Jump to navigation
Jump to search
mNo edit summary |
mNo edit summary |
||
| Line 34: | Line 34: | ||
*'''F''': Weir width [m] | *'''F''': Weir width [m] | ||
*'''G''': weir coefficient [-] <code>0 < µ ≤ 1</code> | *'''G''': weir coefficient [-] <code>0 < µ ≤ 1</code> | ||
*'''H''': flexible/movable weir: ID of the control-function(e.g. "<code>y02</code>"),whichs value shall be subtracted from the weir hight.(refer to [[#Hinweise| | *'''H''': flexible/movable weir: ID of the control-function(e.g. "<code>y02</code>"),whichs value shall be subtracted from the weir hight.(refer to [[#Hinweise|Hints]]). | ||
'''Pipe(s):''' if there are several pipes one after another the following pipe sections are to be written into the next line (without a new HYA ID) | '''Pipe(s):''' if there are several pipes one after another the following pipe sections are to be written into the next line (without a new HYA ID) | ||
*'''I''': Heigth of the inlet edge | *'''I''': Heigth of the inlet edge | ||
| Line 54: | Line 54: | ||
===Tailwater level for turbines and weirs=== | ===Tailwater level for turbines and weirs=== | ||
A Tailwater level is supplied by a control-function (system status).The ID of the desired control-funtcion must be named in the column <code>'''WSP unten'''</code>. The IDs of the control-functions are assigned in the [[KTR-Datei]]. | A Tailwater level is supplied by a control-function (system status).The ID of the desired control-funtcion must be named in the column <code>'''WSP unten'''</code>. The IDs of the control-functions are assigned in the [[KTR-Datei|KTR-File]]. | ||
If no tailwater level is supplied, the tailwaterlevel will be determined as a <code>MIN_mNN</code>, which is a constant with the value -490 müNN. | If no tailwater level is supplied, the tailwaterlevel will be determined as a <code>MIN_mNN</code>, which is a constant with the value -490 müNN. | ||
===Lowerable weir=== | ===Lowerable weir=== | ||
A lowerable weir can be implemented by writing the ID of a control-function (refer to [[KTR-Datei]]) into the column <code>'''Fak hue'''</code>. The value/factor from the control-function will be '''subtracted''' from the normal weir crest for each time increment (not multiplied). | A lowerable weir can be implemented by writing the ID of a control-function (refer to [[KTR-Datei|KTR-File]]) into the column <code>'''Fak hue'''</code>. The value/factor from the control-function will be '''subtracted''' from the normal weir crest for each time increment (not multiplied). | ||
[[Kategorie:BlueM Eingabedateien]] | [[Kategorie:BlueM Eingabedateien]] | ||
Revision as of 06:22, 25 February 2013
BlueM.Sim | Download | Application | Theory | Development
Input files · ALL SYS · FKT KTR · EXT JGG WGG TGG · TAL HYA TRS EIN URB VER RUE BEK EZG FKA · BOA BOD LNZ EFL · DIF
Hydraulics
File
1 2 3 4 5 6 7 8 9 10 11 | *Hydraulik (*.HYA)*=================*|-----|-----|-----|---------------------------|-------------------------------------------|---------------------------------------------|*| | | | Wehrüberfall (1) | Rohrleitung(en) (2) | Turbine (3) |*| HYA | WSP | Kng |Wehr- Wehr- Wehr- Fak| Einl- Länge D A- Um- kB Zeta | P Qmax Qmin Hoehe Ver- %von eta |*| ID |unten| |Form kante Breite mue hue| kante quer fang | Leistg lust Qmax |*|-----|-----|-----|---------------------------|-------------------------------------------|---------------------------------------------|*| - |KTRID| 1-3 | 1-5 mNN m - KTR| mNN m mm m2 m mm | KW m3/s m3/s mNN - % - |*|-<->-|-<->-|-<->-|-<->-<----->-<--->-<-->-<->|<---->-<---->-<--->-<--->-<--->-<--->-<--->|-<---->-<--->-<--->-<----->-<--->-<--->-<--->| | A | B | C | D E F G H | I J K L M N O | P Q R S T U V |*|-----|-----|-----|---------------------------|-------------------------------------------|---------------------------------------------| |
Explanations
General:
- A: ID of the hydraulic element
- B: ID of the control function which supplies the tailwater level (e.g. "
y02") - C: Identifier: Calculation-type:
1: weir overflow,2: pipe,3: turbine
Weir overflow:
- D: Weir form [1-5]:
1: wide-crested2: roof-shaped3: Hight/Width = 14: Hight/Width < 0.45: sharp-edged
- E: Weir crest [müNN]
- F: Weir width [m]
- G: weir coefficient [-]
0 < µ ≤ 1 - H: flexible/movable weir: ID of the control-function(e.g. "
y02"),whichs value shall be subtracted from the weir hight.(refer to Hints).
Pipe(s): if there are several pipes one after another the following pipe sections are to be written into the next line (without a new HYA ID)
- I: Heigth of the inlet edge
- J: Pipe length
- K: Pipe diameter
- L: Cross-section area (if K is given, the cross-section area is not needed)
- M: Perimeter (if K is given, the perimeter is not needed)
- N: Roughness coefficient
- O: Coefficient of loss (Inlet losses)
Turbine:
- P: Turbine capacity [kW]
- Q: Turbine absorption capacity [m³/s]
- R: Minimum flow rate [m³/s]
- S: Inlet height [müNN]
- T: Coefficient of losses [-]
0 < η < 1 - U & V: Minimum 2 rows with supporting points for the efficeny-curve
ηT=f(Q/Qmax)of the turbine
Hints
Tailwater level for turbines and weirs
A Tailwater level is supplied by a control-function (system status).The ID of the desired control-funtcion must be named in the column WSP unten. The IDs of the control-functions are assigned in the KTR-File.
If no tailwater level is supplied, the tailwaterlevel will be determined as a MIN_mNN, which is a constant with the value -490 müNN.
Lowerable weir
A lowerable weir can be implemented by writing the ID of a control-function (refer to KTR-File) into the column Fak hue. The value/factor from the control-function will be subtracted from the normal weir crest for each time increment (not multiplied).