ALL-File: Difference between revisions

From BlueM
Jump to navigation Jump to search
(Übersetzung)
m (kleine Korrekturen der Übersetzung)
Line 75: Line 75:


==Translations==
==Translations==
In this section you will find the english translation of the german wording used in the example All-File.Explanations of some of the options can be found in the section '''Explanations''' of this page.
In this section you will find the english translation of the german wording used in the example All-File.An Explanation of some of the options can be found in the section '''Explanations''' of this page.


===Bezeichnung===
===Bezeichnung===
Line 85: Line 85:


===Zeitschritt===
===Zeitschritt===
* <code> Zeitschritt </code> is the <code> Time increment </code>
* <code> Zeitschritt </code> is the <code> time step </code>


===Anfangsbedingungen===
===Anfangsbedingungen===
*<code> Anfangsbedingungen </code> are the <code> Inital conditions </code>
*<code> Anfangsbedingungen </code> are the <code> inital conditions </code>


===Simulationsoptionen===
===Simulationsoptionen===
*<code> Simulationsoptionen </code> are the <code> Simulation options </code>
*<code> Simulationsoptionen </code> are the <code> simulation options </code>


===Berechnungsparameter===
===Berechnungsparameter===
*<code> Berechnungsparameter </code> are the <code> Simulations parameters </code>
*<code> Berechnungsparameter </code> are the <code> simulations parameters </code>


===Ausgabeoptionen===
===Ausgabeoptionen===
* <code> Ausgabeoptionen </code> are the <code> Output options </code>
* <code> Ausgabeoptionen </code> are the <code> output options </code>


===DiffQuellen===
===DiffQuellen===
Line 103: Line 103:


===Erw. Ausgabeoptionen===
===Erw. Ausgabeoptionen===
* <code> Erw. Ausgabeoptionen </code> are <code> Further output options </code>
* <code> Erw. Ausgabeoptionen </code> are <code> further output options </code>






==Explanations==
==Explanations==
===Time increment===
===Time step===
* <code>Time increment duration [min]</code>:  
* <code>Time step duration [min]</code>:  
:A Value between 1 and 43200 (= 30 days)
:A Value between 1 and 43200 (= 30 days)
* <code>Time increment month = M</code>:  
* <code>Time step month = M</code>:  
:If <code>M</code> is chosen here, the <code>time inrement duration [min]</code> will be ignored and a (variable) time inrement of exactly one month will be utilized, which begins at the first of a month and ends with the first of the following month .
:If <code>M</code> is chosen here, the <code>time step duration [min]</code> will be ignored and a (variable) time step of exactly one month will be utilized, which begins at the first of a month and ends with the first of the following month .


===Inital conditions===
===Inital conditions===
* <code>Losses due to troughs [mm]</code>:
* <code>losses due to troughs [mm]</code>:
: Trough losses of the sealed ares (for further information go to [[Natürliche_Einzugsgebiete#Oberflächenwasservorrat (Versiegelter Flächenanteil) O | Theorie:Oberflächenwasservorrat (Versiegelter Flächenanteil)]])
: Trough losses of the sealed ares (for further information go to [[Natürliche_Einzugsgebiete#Oberflächenwasservorrat (Versiegelter Flächenanteil) O | Theorie:Oberflächenwasservorrat (Versiegelter Flächenanteil)]])
* <code>Initial reservoir content [%]</code>:  
* <code>initial reservoir content [%]</code>:  
:Refers to the [[BEK-Datei]], which contains the rain overflow basins as well as the rain retention basins of the urban drainage system. The initial reservoir content of a dam is configured in the [[TAL-Datei]].  
:Refers to the [[BEK-Datei]], which contains the rain overflow basins as well as the rain retention basins of the urban drainage system. The initial reservoir content of a dam is configured in the [[TAL-Datei]].  
* <code>Initial soil moisture</code>:  
* <code>initial soil moisture</code>:  
:Global initial soil moisture, which will be used as the initial soil moisture of each individual HRU  [[EZG-Datei|Einzugsgebiete]].
:Global initial soil moisture, which will be used as the initial soil moisture of each individual HRU  [[EZG-Datei|Einzugsgebiete]].


Line 131: Line 131:
* <code>HRU-Discharge wave output (LEFLWELOUT). :</code>
* <code>HRU-Discharge wave output (LEFLWELOUT). :</code>
: Creates a [[EFL.WEL-Datei]] containing a detailed discharge wave (including soil moisture) for individual HRUs (this option must be enabled for desired HRUs in the [[EFL-Datei]]!)
: Creates a [[EFL.WEL-Datei]] containing a detailed discharge wave (including soil moisture) for individual HRUs (this option must be enabled for desired HRUs in the [[EFL-Datei]]!)
* <code>HRU-Soil moisture (LEFLOUT)... :</code>
* <code>HRU-Soil parameters (LEFLOUT)... :</code>
: Writes the mean soil parameters of the three calculation horizns for each HRU into a [[EFL.TXT-Datei]]
: Writes the mean soil parameters of the three calculation horizons for each HRU into a [[EFL.TXT-Datei]]
* <code>DIF-Test output (LDIFOUT) ..... :</code>
* <code>DIF-Test output (LDIFOUT) ..... :</code>
: Creates a debug-report for the calculation including diffuse sources
: Creates a debug-report for the calculation including diffuse sources

Revision as of 03:08, 9 January 2013

BlueM_icon.png BlueM.Sim | Download | Application | Theory | Development

Input files · ALL SYS · FKT KTR · EXT JGG WGG TGG · TAL HYA TRS EIN URB VER RUE BEK EZG FKA · BOA BOD LNZ EFL · DIF

General Information

Datei

*Allgemeine Angaben (*.ALL)
*==========================

 Bezeichnung.....................: Speicherbewirtschaftung

*Hauptueberschriften:
*--------------------
................................:
................................:
................................:

*Simulations-Zeitraum:
*---------------------             TT.MM.JJJJ hh:mm - TT.MM.JJJJ hh:mm
 SimBeginn - SimEnde ............: 01.11.1979 08:00 - 31.10.1980 08:00

*Zeitschritt:
*------------
 Zeitschrittlaenge [min] ........: 30
 Zeitschritt Monat = M ..........:

*Anfangsbedingungen:
*-------------------
 Muldenverluste [mm] ............: 1
 Anfangsverlust [%] .............: 100
 Gerinneabfluss [% von MQ] ......: 100
 Anfangsbeckenfuellung [%] ......: 100
 Anfangsbodenfeuchte [%] ........: 100

*Simulationsoptionen:
*-------------------
 Kontrollfunktionen ...... [J/N] : N
 Berechnung Zielfunktion   [J/N] : N

*Berechnungsparameter:
*--------------------
 Exponent Abweichungen Sollwert .: 0
 Fehlerabweichung am Pegel [%] ..: 0
 Fehlerabweichung Zielfkt. [%] ..: 0

*Ausgabeoptionen:
*---------------
 Ausgabe Maximalereignisse [J/N] : N
 Bilanzausgabe ........... [J/N] : N
 ... Wahrscheinlichkeiten  [J/N] : N
 Ganglinienausgabe ....... [J/N] : J
 ... CSV-Format .......... [J/N] : J
 ... Binaerausgabe ....... [J/N] : N
 Animation ............... [J/N] : N

*DiffQuellen:
*-------------
 Berechnung .....................: 0
 Anzahl Stoffe ..................: 0

*Erw. Ausgabeoptionen:
*-------------
 EFL-Wellenausgabe (LEFLWELOUT). : N
 EFL-Bodenkennwerte (LEFLOUT)... : N
 DIF-Testausgabe (LDIFOUT) ..... : N
 Protokollausgabe (LLOGOUT) .... : N
 LTSTOUT ....................... : N
 LBFFKT ........................ : N
 LBFOUT ........................ : N

*Beschreibung:
*-------------

Translations

In this section you will find the english translation of the german wording used in the example All-File.An Explanation of some of the options can be found in the section Explanations of this page.

Bezeichnung

  • Bezeichnung....: Speicherbewirtschaftung is charaterization...: reservoir management

Simulations-Zeitraum

  • Simulations-Zeitraum is the Simulation-period
  • the date-format needed is day.month.year hour:minute - day.month.year hour:minute

Zeitschritt

  • Zeitschritt is the time step

Anfangsbedingungen

  • Anfangsbedingungen are the inital conditions

Simulationsoptionen

  • Simulationsoptionen are the simulation options

Berechnungsparameter

  • Berechnungsparameter are the simulations parameters

Ausgabeoptionen

  • Ausgabeoptionen are the output options

DiffQuellen

  • DiffQuellen ist an abriviation of diffuse Quellen and refers to the diffuse sources

Erw. Ausgabeoptionen

  • Erw. Ausgabeoptionen are further output options


Explanations

Time step

  • Time step duration [min]:
A Value between 1 and 43200 (= 30 days)
  • Time step month = M:
If M is chosen here, the time step duration [min] will be ignored and a (variable) time step of exactly one month will be utilized, which begins at the first of a month and ends with the first of the following month .

Inital conditions

  • losses due to troughs [mm]:
Trough losses of the sealed ares (for further information go to Theorie:Oberflächenwasservorrat (Versiegelter Flächenanteil))
  • initial reservoir content [%]:
Refers to the BEK-Datei, which contains the rain overflow basins as well as the rain retention basins of the urban drainage system. The initial reservoir content of a dam is configured in the TAL-Datei.
  • initial soil moisture:
Global initial soil moisture, which will be used as the initial soil moisture of each individual HRU Einzugsgebiete.

Output options

  • ... Probabilities [Y/N]:
If activated a file will be created containing the probability distribution of the results(PRB-Datei). However this file will only be created for elements for which both the output of the hydrograph and the output of the balance has been activated (for further informatin go to SYS-Datei).
  • ... CSV-Format [Y/N]:
By enabling this option the values in the result-files (WEL and KWL-Dateien) will be separated by semicolons. This is very useful for Excel!

Further output options

  • HRU-Discharge wave output (LEFLWELOUT). :
Creates a EFL.WEL-Datei containing a detailed discharge wave (including soil moisture) for individual HRUs (this option must be enabled for desired HRUs in the EFL-Datei!)
  • HRU-Soil parameters (LEFLOUT)... :
Writes the mean soil parameters of the three calculation horizons for each HRU into a EFL.TXT-Datei
  • DIF-Test output (LDIFOUT) ..... :
Creates a debug-report for the calculation including diffuse sources
  • Protokollausgabe (LLOGOUT) .... :
Log protocol output ($LOG.TXT)
  • LTSTOUT ....................... :
(Control) output of each step of the simualtion ( which step was completed? Which function was called?)
  • LBFFKT ........................ :
Output of soil funtions for each time increment
  • LBFOUT ........................ :
Old debug-output for soil moisture, contained and improved in LEFLWELOUT and LEFLOUT
Retrieved from "https://wiki.bluemodel.org/index.php?title=ALL-File&oldid=6864"