BlueM.Sim compilation - Revision history

Froehlich: mention Intel Fortran Compiler Extension for Visual Studio

2024-03-02T12:46:35Z

mention Intel Fortran Compiler Extension for Visual Studio

← Older revision		Revision as of 05:46, 2 March 2024
Line 11:		Line 11:
	** [https://www.intel.com/content/www/us/en/developer/tools/oneapi/base-toolkit-download.html Intel oneAPI Base Toolkit], select at a minimum "Intel Distribution for GDB". This provides the Fortran debugger support for Visual Studio.		** [https://www.intel.com/content/www/us/en/developer/tools/oneapi/base-toolkit-download.html Intel oneAPI Base Toolkit], select at a minimum "Intel Distribution for GDB". This provides the Fortran debugger support for Visual Studio.
	** [https://www.intel.com/content/www/us/en/developer/tools/oneapi/hpc-toolkit-download.html Intel oneAPI HPC Toolkit], select at a minimum "Intel Fortran Compiler".		** [https://www.intel.com/content/www/us/en/developer/tools/oneapi/hpc-toolkit-download.html Intel oneAPI HPC Toolkit], select at a minimum "Intel Fortran Compiler".
			:Or, use the new Intel Fortran Compiler Extension for Visual Studio: https://marketplace.visualstudio.com/items?itemName=intel-corporation.fortranonline

	Further reading:		Further reading:

Froehlich: /* Compilation */ add some helpful links

2023-09-15T14:46:41Z

Compilation: add some helpful links

← Older revision		Revision as of 07:46, 15 September 2023
Line 11:		Line 11:
	** [https://www.intel.com/content/www/us/en/developer/tools/oneapi/base-toolkit-download.html Intel oneAPI Base Toolkit], select at a minimum "Intel Distribution for GDB". This provides the Fortran debugger support for Visual Studio.		** [https://www.intel.com/content/www/us/en/developer/tools/oneapi/base-toolkit-download.html Intel oneAPI Base Toolkit], select at a minimum "Intel Distribution for GDB". This provides the Fortran debugger support for Visual Studio.
	** [https://www.intel.com/content/www/us/en/developer/tools/oneapi/hpc-toolkit-download.html Intel oneAPI HPC Toolkit], select at a minimum "Intel Fortran Compiler".		** [https://www.intel.com/content/www/us/en/developer/tools/oneapi/hpc-toolkit-download.html Intel oneAPI HPC Toolkit], select at a minimum "Intel Fortran Compiler".

			Further reading:
			* [https://www.intel.com/content/www/us/en/developer/articles/guide/installing-microsoft-visual-studio-2019-for-use-with-intel-compilers.html Installing Microsoft Visual Studio* for Use with Intel® Compilers]
			* [https://www.intel.com/content/www/us/en/developer/articles/training/intel-fortran-compiler-in-ms-visual-studio.html How to Select oneAPI Intel® Fortran Compiler and Compiler Version in Microsoft* Visual Studio]

	==Compiler settings==		==Compiler settings==

Froehlich: update URLs for Intel Compiler download

2023-03-26T15:34:36Z

update URLs for Intel Compiler download

← Older revision		Revision as of 08:34, 26 March 2023
Line 9:		Line 9:
	** Select at least the "Desktop Development with C++" component		** Select at least the "Desktop Development with C++" component
	* Intel Fortran Compiler:		* Intel Fortran Compiler:
	** [https://~~software~~.intel.com/content/www/us/en/~~develop~~/tools/oneapi/base-toolkit/download.html Intel oneAPI Base Toolkit], select at a minimum "Intel Distribution for GDB". This provides the Fortran debugger support for Visual Studio.		** [https://www.intel.com/content/www/us/en/developer/tools/oneapi/base-toolkit-download.html Intel oneAPI Base Toolkit], select at a minimum "Intel Distribution for GDB". This provides the Fortran debugger support for Visual Studio.
	** [https://~~software~~.intel.com/content/www/us/en/~~develop~~/tools/oneapi/hpc-toolkit/download.html Intel oneAPI HPC Toolkit], select at a minimum "Intel Fortran Compiler".		** [https://www.intel.com/content/www/us/en/developer/tools/oneapi/hpc-toolkit-download.html Intel oneAPI HPC Toolkit], select at a minimum "Intel Fortran Compiler".

	==Compiler settings==		==Compiler settings==

Froehlich: moved Debugging section to BlueM.Sim Develeopment

2023-03-04T09:36:57Z

moved Debugging section to BlueM.Sim Develeopment

← Older revision		Revision as of 02:36, 4 March 2023
Line 11:		Line 11:
	** [https://software.intel.com/content/www/us/en/develop/tools/oneapi/base-toolkit/download.html Intel oneAPI Base Toolkit], select at a minimum "Intel Distribution for GDB". This provides the Fortran debugger support for Visual Studio.		** [https://software.intel.com/content/www/us/en/develop/tools/oneapi/base-toolkit/download.html Intel oneAPI Base Toolkit], select at a minimum "Intel Distribution for GDB". This provides the Fortran debugger support for Visual Studio.
	** [https://software.intel.com/content/www/us/en/develop/tools/oneapi/hpc-toolkit/download.html Intel oneAPI HPC Toolkit], select at a minimum "Intel Fortran Compiler".		** [https://software.intel.com/content/www/us/en/develop/tools/oneapi/hpc-toolkit/download.html Intel oneAPI HPC Toolkit], select at a minimum "Intel Fortran Compiler".

	~~==Debugging==~~
	~~[[File:BlueM.Win debug setting.png\|thumb\|right\|Screenshot of debug setting in BlueM.Win required for debugging BlueM.Sim]]~~
	~~In order to be able to debug BlueM.Sim, you need to activate the option ''Enable native code debugging'' in the ''Debug'' section of the project properties of the startup-application (i.e. BlueM.Win).~~

	~~This is a per-user-setting and needs to be activated for every individual build setup.~~

	==Compiler settings==		==Compiler settings==

Froehlich: add more information

2023-03-04T09:32:26Z

add more information

← Older revision		Revision as of 02:32, 4 March 2023
Line 6:		Line 6:

	Recommended software setup for compiling BlueM.Sim:		Recommended software setup for compiling BlueM.Sim:
	* [https://visualstudio.microsoft.com/ Microsoft Visual Studio 2019] (Community Edition is sufficient)		* [https://visualstudio.microsoft.com/ Microsoft Visual Studio 2019 or 2022] (Community Edition is sufficient)
	** Select at least the "Desktop Development with C++" component		** Select at least the "Desktop Development with C++" component
	* Intel Fortran Compiler:		* Intel Fortran Compiler:
	** [https://software.intel.com/content/www/us/en/develop/tools/oneapi/base-toolkit/download.html Intel oneAPI Base Toolkit], select at a minimum "Intel Distribution for GDB". This provides the Fortran debugger support for Visual Studio.		** [https://software.intel.com/content/www/us/en/develop/tools/oneapi/base-toolkit/download.html Intel oneAPI Base Toolkit], select at a minimum "Intel Distribution for GDB". This provides the Fortran debugger support for Visual Studio.
	** [https://software.intel.com/content/www/us/en/develop/tools/oneapi/hpc-toolkit/download.html Intel oneAPI HPC Toolkit], select at a minimum "Intel Fortran Compiler".		** [https://software.intel.com/content/www/us/en/develop/tools/oneapi/hpc-toolkit/download.html Intel oneAPI HPC Toolkit], select at a minimum "Intel Fortran Compiler".

			==Debugging==
			[[File:BlueM.Win debug setting.png\|thumb\|right\|Screenshot of debug setting in BlueM.Win required for debugging BlueM.Sim]]
			In order to be able to debug BlueM.Sim, you need to activate the option ''Enable native code debugging'' in the ''Debug'' section of the project properties of the startup-application (i.e. BlueM.Win).

			This is a per-user-setting and needs to be activated for every individual build setup.

	==Compiler settings==		==Compiler settings==
Line 16:		Line 22:
	Required compiler settings (''Flags''):		Required compiler settings (''Flags''):
	* <code>/assume:byterecl</code>		* <code>/assume:byterecl</code>
	: This causes Intel Fortran to interpret the record length of unformatted files (e.g. time series in [[BIN-Format]]) in bytes instead of in 4 byte units (longwords). This flag is set by setting ''Use Bytes as RECL unit for unformatted files:'' to '''Yes''' (see image).		: This causes Intel Fortran to interpret the record length of unformatted files (e.g. time series in [[BIN-Format]]) in bytes instead of in 4 byte units (longwords). This flag is set by setting ''Use Bytes as RECL unit for unformatted files:'' to '''Yes''' (see image).
			The compiler settings are stored in the project file <code>BlueM.Sim.vfproj</code> and normally do not have to be adjusted.

	==Build configurations==		==Build configurations==

Froehlich at 10:22, 23 December 2021

2021-12-23T10:22:09Z

@@ Line 3: / Line 3: @@
 ==Compilation==
-BlueM.Sim is written in FORTRAN. Additional components such as [[BlueM.DLLAdapter]] and [[Wave]] are written in C# and VB.NET.
+BlueM.Sim is written in FORTRAN. Additional components such as [[BlueM.DLLAdapter]] and [[BlueM.Wave]] are written in C# and VB.NET, while [[BlueM.LaPipe]] is written in C++.
 Recommended software setup for compiling BlueM.Sim:
@@ Line 11: / Line 11: @@
 ** [https://software.intel.com/content/www/us/en/develop/tools/oneapi/base-toolkit/download.html Intel oneAPI Base Toolkit], select at a minimum "Intel Distribution for GDB". This provides the Fortran debugger support for Visual Studio.
 ** [https://software.intel.com/content/www/us/en/develop/tools/oneapi/hpc-toolkit/download.html Intel oneAPI HPC Toolkit], select at a minimum "Intel Fortran Compiler".
 ==Compiler settings==
@@ Line 24: / Line 21: @@
 The following build configurations for BlueM.Sim are defined in the project file:
 * '''Debug''': Debug version, no optimizations
-* '''Release''': Full optimization, requires processor supporting Intel<sup>®</sup> Streaming SIMD Extensions 2 (Intel<sup>®</sup> SSE2). Auto parallelisation (with threshold 90) ON
+* '''Release''': Release version with optimizations
 [[Kategorie:BlueM.Sim Development]]

Froehlich: /* Compiler settings */ translation

2021-04-24T12:46:16Z

Compiler settings: translation

← Older revision		Revision as of 05:46, 24 April 2021
Line 17:		Line 17:
	==Compiler settings==		==Compiler settings==
	[[Bild:RECLinBytes.jpg\|thumb\|Use Bytes as RECL]]		[[Bild:RECLinBytes.jpg\|thumb\|Use Bytes as RECL]]
	~~Compiler-Einstellungen~~ (''Flags'')~~, die zur erfolgreichen Kompilierung erforderlich sind.~~		Required compiler settings (''Flags''):
	* <code>/assume:byterecl</code>		* <code>/assume:byterecl</code>
	: ~~Damit~~ Intel Fortran ~~bei unformatierten Dateien~~ (~~wie den Zeitreihen im~~ BIN-Format) ~~die Record-Länge als~~ bytes ~~und nicht als~~ 4-byte ~~Einheiten~~ (longwords) ~~interpretiert, muss folgender Flag gesetzt werden: "'~~''Use Bytes as RECL unit for unformatted files: Yes'''" (~~siehe Bild~~)		: This causes Intel Fortran to interpret the record length of unformatted files (e.g. time series in [[BIN-Format]]) in bytes instead of in 4 byte units (longwords). This flag is set by setting ''Use Bytes as RECL unit for unformatted files:'' to '''Yes''' (see image).

	==Build configurations==		==Build configurations==

Froehlich: /* Compilation */ update software setup for compilation

2021-04-24T12:36:44Z

Compilation: update software setup for compilation

← Older revision		Revision as of 05:36, 24 April 2021
Line 5:		Line 5:
	BlueM.Sim is written in FORTRAN. Additional components such as [[BlueM.DLLAdapter]] and [[Wave]] are written in C# and VB.NET.		BlueM.Sim is written in FORTRAN. Additional components such as [[BlueM.DLLAdapter]] and [[Wave]] are written in C# and VB.NET.

	~~Requirements~~ for compiling BlueM.Sim:		Recommended software setup for compiling BlueM.Sim:
	* [~~http~~://~~www~~.microsoft.com/~~visualstudio/en-us/products/professional/default.mspx~~ Microsoft Visual Studio ~~2008 Professional~~] (~~the Standard~~ Edition ~~may be enough, but has not been tested~~)		* [https://visualstudio.microsoft.com/ Microsoft Visual Studio 2019] (Community Edition is sufficient)
	* [~~http~~://software.intel.com/en-us/~~articles~~/~~fortran~~-~~compilers~~/ Intel Fortran Compiler] ~~from v11 upwards~~		** Select at least the "Desktop Development with C++" component
	* [http://www.steema.com/products/teechart/net/overview.html TeeChart for .NET (v4) developer license] ~~(only required for compiling [[Wave]])~~		* Intel Fortran Compiler:
			** [https://software.intel.com/content/www/us/en/develop/tools/oneapi/base-toolkit/download.html Intel oneAPI Base Toolkit], select at a minimum "Intel Distribution for GDB". This provides the Fortran debugger support for Visual Studio.
			** [https://software.intel.com/content/www/us/en/develop/tools/oneapi/hpc-toolkit/download.html Intel oneAPI HPC Toolkit], select at a minimum "Intel Fortran Compiler".

			Additional requirements for compiling [[BlueM.Win]] with [[Wave]]:
			* [http://www.steema.com/products/teechart/net/overview.html TeeChart for .NET (v4) developer license]

	==Compiler settings==		==Compiler settings==

Froehlich: /* Compilation */ updated link

2011-09-21T21:54:21Z

Compilation: updated link

← Older revision		Revision as of 14:54, 21 September 2011
Line 7:		Line 7:
	Requirements for compiling BlueM.Sim:		Requirements for compiling BlueM.Sim:
	* [http://www.microsoft.com/visualstudio/en-us/products/professional/default.mspx Microsoft Visual Studio 2008 Professional] (the Standard Edition may be enough, but has not been tested)		* [http://www.microsoft.com/visualstudio/en-us/products/professional/default.mspx Microsoft Visual Studio 2008 Professional] (the Standard Edition may be enough, but has not been tested)
	* [http://~~www~~.intel.com/~~cd/software~~/~~products~~/~~asmo~~-~~na/eng/~~compilers/~~278834.htm~~ Intel Fortran Compiler] v11		* [http://software.intel.com/en-us/articles/fortran-compilers/ Intel Fortran Compiler] from v11 upwards
	* [http://www.steema.com/products/teechart/net/overview.html TeeChart for .NET (v4) developer license] (only required for compiling [[Wave]])		* [http://www.steema.com/products/teechart/net/overview.html TeeChart for .NET (v4) developer license] (only required for compiling [[Wave]])

Froehlich: /* Build configurations */ Bug 442 is closed

2011-09-21T21:23:12Z

Build configurations: Bug 442 is closed

← Older revision		Revision as of 14:23, 21 September 2011
Line 20:		Line 20:
	* '''Debug''': Debug version, no optimizations		* '''Debug''': Debug version, no optimizations
	* '''Release''': Full optimization, requires processor supporting Intel<sup>®</sup> Streaming SIMD Extensions 2 (Intel<sup>®</sup> SSE2). Auto parallelisation (with threshold 90) ON		* '''Release''': Full optimization, requires processor supporting Intel<sup>®</sup> Streaming SIMD Extensions 2 (Intel<sup>®</sup> SSE2). Auto parallelisation (with threshold 90) ON
	* '''Release_AllCPUs''': Full optimization, for generic IA-32 architectures (older processors~~) (Bug 442~~). Auto parallelisation OFF		* '''Release_AllCPUs''': Full optimization, for generic IA-32 architectures (older processors). Auto parallelisation OFF

	==Compilation in Eclipse==		==Compilation in Eclipse==