BlueM.Opt Usage - Revision history

Froehlich: /* Notes */ Add note for Access driver

2022-11-17T10:52:57Z

Notes: Add note for Access driver

← Older revision		Revision as of 03:52, 17 November 2022
Line 28:		Line 28:
	When using [[SensiPlot]], the setting ''Save individual datasets'' causes each indivual datasets to be simulated in a subfolder of the original dataset named "sensiplot_X", where X is the solution ID. If the aforementioned setting is deactivated, the dataset modifications and simulations are carried out using the original dataset.		When using [[SensiPlot]], the setting ''Save individual datasets'' causes each indivual datasets to be simulated in a subfolder of the original dataset named "sensiplot_X", where X is the solution ID. If the aforementioned setting is deactivated, the dataset modifications and simulations are carried out using the original dataset.

			=== Microsoft.ACE.OLEDB.12.0 Provider ===
			BlueM.Opt stores optimization results in a MS Access database. This requires a corresponding driver to be installed on the machine. If you have Microsoft Office installed, this driver is usually already installed. However, if you have the 32bit version of Office installed, you will have to additionally install the x64-version of the driver for BlueM.Opt, which is a x64 program, to work.

			A missing driver will result in the following or similar error message when setting the method:
			<blockquote>
			The Microsoft.ACE.OLEDB.12.0 Provider is not registered on the local machine

			Der Microsoft.ACE.OLEDB.12.0 Provider ist nicht auf dem lokalen Computer registriert
			</blockquote>

			To fix this, download and install <code>AccessDatabaseEngine_X64.exe</code> from here: https://www.microsoft.com/en-US/download/details.aspx?id=13255

	<!--		<!--

Froehlich: Changes in BlueM.Opt 1.8.5

2020-11-17T07:54:22Z

Changes in BlueM.Opt 1.8.5

← Older revision		Revision as of 00:54, 17 November 2020
Line 21:		Line 21:

	==Notes==		==Notes==
	=== ~~Modifications to the dataset~~ ===		=== Dataset locations and simulation results ===
	BlueM.Opt creates copies of the dataset for carrying out the simulations. These copies are located in the directory containing <code>BlueM.Opt.exe</code> and are called <code>Thread_01</code>, <code>Thread_02</code>, etc.		BlueM.Opt creates copies of the dataset for carrying out the simulations. These copies are located in the directory containing <code>BlueM.Opt.exe</code> and are called <code>Thread_01</code>, <code>Thread_02</code>, etc. Once the objective function values have been calculated, the dataset together with the simulation results in these folders are deleted/overwritten.

			In order to view hydrographs and/or obtain the full simulation results of specific solutions, select a solution by clicking on it in any of the diagrams and then click the button in the ''Selected solutions'' dialog. This will cause the selected solution(s) to be simulated again, but this time in a subfolder of the original dataset named "solution_X", where X is the solution ID.

			When using [[SensiPlot]], the setting ''Save individual datasets'' causes each indivual datasets to be simulated in a subfolder of the original dataset named "sensiplot_X", where X is the solution ID. If the aforementioned setting is deactivated, the dataset modifications and simulations are carried out using the original dataset.

	~~The original dataset is only modified and used for simulation in the following two cases:~~
	~~# when using [[SensiPlot]]~~
	~~# when selecting a solution and reevaluating that solution for displaying the hydrographs in [[Wave]].~~

	<!--		<!--

Froehlich: improved description

2018-03-03T10:26:23Z

improved description

← Older revision		Revision as of 03:26, 3 March 2018
Line 30:		Line 30:
	<!--		<!--
	=== Using a custom version of Talsim ===		=== Using a custom version of Talsim ===
	Currently, Talsim-NG v3.0.1.6 is included in BlueM.Opt. To use a custom version of Talsim, edit the <code>user.config</code> file located in ~~the BlueM.Opt directory under~~ the following ~~directory~~: <code>C:\Users\[USERNAME]\AppData\Local\BlueM_Dev_Group\</code>.		Currently, Talsim-NG v3.0.1.6 is included in BlueM.Opt and is located under <code>\TALSIM\talsimw64.exe</code>. To use a custom version of Talsim, edit the <code>user.config</code> file located in the following location: <code>C:\Users\[USERNAME]\AppData\Local\BlueM_Dev_Group\BlueM.Opt.exe_Url_[]\[version]\user.config</code> and change the value of the setting <code>TALSIM_path</code> to contain the path to the desired custom Talsim executable. Restart BlueM.Opt in order for the chage to take effect.
	-->		-->

	[[Category:BlueM.Opt Usage\|*]]		[[Category:BlueM.Opt Usage\|*]]

Froehlich: /* Modifications to the dataset */

2018-01-24T09:02:15Z

Modifications to the dataset

← Older revision		Revision as of 02:02, 24 January 2018
Line 22:		Line 22:
	==Notes==		==Notes==
	=== Modifications to the dataset ===		=== Modifications to the dataset ===
	BlueM.Opt creates copies of the dataset for carrying out the simulations. These copies are located in the directory containing <code>BlueM.Opt.exe</code>and are called <code>Thread_01</code>, <code>Thread_02</code>, etc.		BlueM.Opt creates copies of the dataset for carrying out the simulations. These copies are located in the directory containing <code>BlueM.Opt.exe</code> and are called <code>Thread_01</code>, <code>Thread_02</code>, etc.

	The original dataset is only modified and used for simulation in the following two cases:		The original dataset is only modified and used for simulation in the following two cases:

Froehlich: commented out the section about using a custom version of Talsim because it's not yet implemented.

2018-01-24T09:01:54Z

commented out the section about using a custom version of Talsim because it's not yet implemented.

← Older revision		Revision as of 02:01, 24 January 2018
Line 28:		Line 28:
	# when selecting a solution and reevaluating that solution for displaying the hydrographs in [[Wave]].		# when selecting a solution and reevaluating that solution for displaying the hydrographs in [[Wave]].

			<!--
	=== Using a custom version of Talsim ===		=== Using a custom version of Talsim ===
	Currently, Talsim-NG v3.0.1.6 is included in BlueM.Opt. To use a custom version of Talsim, edit the <code>user.config</code> file located in the BlueM.Opt directory under the following directory: <code>C:\Users\[USERNAME]\AppData\Local\BlueM_Dev_Group\</code>.		Currently, Talsim-NG v3.0.1.6 is included in BlueM.Opt. To use a custom version of Talsim, edit the <code>user.config</code> file located in the BlueM.Opt directory under the following directory: <code>C:\Users\[USERNAME]\AppData\Local\BlueM_Dev_Group\</code>.
			-->

	[[Category:BlueM.Opt Usage\|*]]		[[Category:BlueM.Opt Usage\|*]]

Froehlich: /* Modifications to the dataset */

2018-01-23T10:07:04Z

Modifications to the dataset

← Older revision		Revision as of 03:07, 23 January 2018
Line 22:		Line 22:
	==Notes==		==Notes==
	=== Modifications to the dataset ===		=== Modifications to the dataset ===
	BlueM.Opt creates copies of the dataset for ~~performing~~ the simulations. The original dataset is only modified in the following two cases:		BlueM.Opt creates copies of the dataset for carrying out the simulations. These copies are located in the directory containing <code>BlueM.Opt.exe</code>and are called <code>Thread_01</code>, <code>Thread_02</code>, etc.

			The original dataset is only modified and used for simulation in the following two cases:
	# when using [[SensiPlot]]		# when using [[SensiPlot]]
	# when selecting a solution and reevaluating that solution for displaying the hydrographs in [[Wave]].		# when selecting a solution and reevaluating that solution for displaying the hydrographs in [[Wave]].

	During normal optimization, only the copies of the dataset are manipulated. These copies are located in the directory containing <code>BlueM.Opt.exe</code>and are called <code>Thread_01</code>, <code>Thread_02</code>, etc.

	=== Using a custom version of Talsim ===		=== Using a custom version of Talsim ===

Froehlich: Using a custom version of Talsim

2018-01-23T10:04:48Z

Using a custom version of Talsim

← Older revision		Revision as of 03:04, 23 January 2018
Line 21:		Line 21:

	==Notes==		==Notes==
			=== Modifications to the dataset ===
	BlueM.Opt creates copies of the dataset for performing the simulations. The original dataset is only modified in the following two cases:		BlueM.Opt creates copies of the dataset for performing the simulations. The original dataset is only modified in the following two cases:
	# when using [[SensiPlot]]		# when using [[SensiPlot]]
	# when selecting a solution and reevaluating that solution for displaying the hydrographs in [[Wave]].		# when selecting a solution and reevaluating that solution for displaying the hydrographs in [[Wave]].

	During normal optimization, only the copies of the dataset are manipulated. These copies are located in the directory containing <BlueM.Opt.exe</code>and are called </code>Thread_01</code>, <code>Thread_02</code>, etc.		During normal optimization, only the copies of the dataset are manipulated. These copies are located in the directory containing <code>BlueM.Opt.exe</code>and are called <code>Thread_01</code>, <code>Thread_02</code>, etc.

			=== Using a custom version of Talsim ===
			Currently, Talsim-NG v3.0.1.6 is included in BlueM.Opt. To use a custom version of Talsim, edit the <code>user.config</code> file located in the BlueM.Opt directory under the following directory: <code>C:\Users\[USERNAME]\AppData\Local\BlueM_Dev_Group\</code>.

	[[Category:BlueM.Opt Usage\|*]]		[[Category:BlueM.Opt Usage\|*]]

Froehlich: translation

2018-01-22T12:56:44Z

translation

← Older revision		Revision as of 05:56, 22 January 2018
Line 2:		Line 2:
	<div style="float:right; margin-left:10px">__TOC__</div>		<div style="float:right; margin-left:10px">__TOC__</div>

	==~~Demonstrationsvideos~~==		==Demonstration videos==
	* [[BlueM.Opt-Demo-Testproblem \| Basics: demonstration using a mathematical test case]]		* [[BlueM.Opt-Demo-Testproblem \| Basics: demonstration using a mathematical test case]]
	* [[BlueM.Opt-Demo-Sim \| Simulation-based optimization: demonstration using a simulation model]]		* [[BlueM.Opt-Demo-Sim \| Simulation-based optimization: demonstration using a simulation model]]
Line 8:		Line 8:
	* [[BlueM.Opt-Demo-Hybrid \| Hybrid: demonstration of simultaneous optimization of both continuous and nominally discrete variables]]		* [[BlueM.Opt-Demo-Hybrid \| Hybrid: demonstration of simultaneous optimization of both continuous and nominally discrete variables]]

	==~~Schnellstart~~==		==Quickstart==
	# ''[[BlueM.Opt Applications\|~~Anwendung~~]]'' ~~auswählen~~		# Start <code>BlueM.Opt.exe</code>
	# ''~~Datensatz~~'' ~~auswählen~~		# Select an ''[[BlueM.Opt Applications\|App]]'' (e.g. BlueM.Sim)
	# ''[[BlueM.Opt Algorithms\|~~Methode~~]]'' (~~Algorithmus~~) ~~auswählen~~		# Select an appropriate ''Dataset''
	# ~~ggf.~~ ''[[BlueM.Opt Settings\|~~Einstellungen~~]]'' ~~anpassen/laden~~		# Select a ''[[BlueM.Opt Algorithms\|Method]]'' (algorithm) (e.g. PES or SensiPlot)
	# ''Start''~~-Button drücken~~		# optionally adjust or load the ''[[BlueM.Opt Settings\|settings]]''
			# Press the ''Start'' button

	~~Siehe auch~~		See also
	* [[BlueM.Opt ~~Eingabedateien~~]]		* [[BlueM.Opt input files]]
	* [[BlueM.Opt ~~Ausgabedateien~~]]		* [[BlueM.Opt output files]]

	==~~Hinweise~~==		==Notes==
	BlueM.Opt ~~macht Kopien des Datensatzes~~. ~~Der Original-Datensatz wird nur~~ in ~~2 Fällen direkt verändert~~:		BlueM.Opt creates copies of the dataset for performing the simulations. The original dataset is only modified in the following two cases:
	# ~~bei~~ [[SensiPlot]]		# when using [[SensiPlot]]
	# ~~immer dann, wenn man eine Lösung anklickt und diese nochmal neu evaluieren lässt, um die Ganglinien~~ in [[Wave]] ~~anzuzeigen~~.		# when selecting a solution and reevaluating that solution for displaying the hydrographs in [[Wave]].

	~~Im Normalfall werden also nur die Kopien des Datensatzes manipuliert~~. ~~Diese liegen in dem Ordner,~~ in ~~dem sich auch~~ BlueM.Opt.exe ~~befindet und heissen "~~Thread_01", "Thread_02", etc.		During normal optimization, only the copies of the dataset are manipulated. These copies are located in the directory containing <BlueM.Opt.exe</code>and are called </code>Thread_01</code>, <code>Thread_02</code>, etc.

			[[Category:BlueM.Opt Usage\|*]]

	[[Category:BlueM.Opt ~~Anwendung~~\|*]]

Froehlich: Froehlich moved page BlueM.Opt Anwendung to BlueM.Opt Usage: translation

2018-01-22T08:39:53Z

Froehlich moved page BlueM.Opt Anwendung to BlueM.Opt Usage: translation

← Older revision	Revision as of 01:39, 22 January 2018
(No difference)

Froehlich at 14:25, 7 October 2009

2009-10-07T14:25:50Z

← Older revision		Revision as of 07:25, 7 October 2009
Line 1:		Line 1:
	{{BlueM.Opt_nav}}		{{BlueM.Opt_nav}}
	<div style="float:right; margin-left:10px">__TOC__</div>		<div style="float:right; margin-left:10px">__TOC__</div>

	~~:''siehe auch [[BlueM.Opt Eingabedateien]] und [[BlueM.Opt Ausgabedateien]]''~~

	==Demonstrationsvideos==		==Demonstrationsvideos==
Line 16:		Line 14:
	# ggf. ''[[BlueM.Opt Settings\|Einstellungen]]'' anpassen/laden		# ggf. ''[[BlueM.Opt Settings\|Einstellungen]]'' anpassen/laden
	# ''Start''-Button drücken		# ''Start''-Button drücken

			Siehe auch
			* [[BlueM.Opt Eingabedateien]]
			* [[BlueM.Opt Ausgabedateien]]

	==Hinweise==		==Hinweise==