ALL-File - Revision history

Froehlich at 11:09, 31 July 2021

2021-07-31T11:09:50Z

← Older revision		Revision as of 04:09, 31 July 2021
Line 144:		Line 144:
	: Old debug-output for soil moisture, contained and improved in LEFLWELOUT and LEFLOUT		: Old debug-output for soil moisture, contained and improved in LEFLWELOUT and LEFLOUT

	[[Category:BlueM.Sim input files\|*]]		[[Category:BlueM.Sim input files]]

Froehlich: category rename

2021-07-31T11:06:43Z

category rename

← Older revision		Revision as of 04:06, 31 July 2021
Line 144:		Line 144:
	: Old debug-output for soil moisture, contained and improved in LEFLWELOUT and LEFLOUT		: Old debug-output for soil moisture, contained and improved in LEFLWELOUT and LEFLOUT

	[[~~Kategorie~~:BlueM ~~Eingabedateien~~]]		[[Category:BlueM.Sim input files\|*]]

Mkissel: /* Initial conditions */ change wording to depression storage and stormwater tanks

2018-09-05T17:45:19Z

Initial conditions: change wording to depression storage and stormwater tanks

← Older revision		Revision as of 10:45, 5 September 2018
Line 115:		Line 115:

	===Initial conditions===		===Initial conditions===
	* <code>losses due to ~~troughs~~ [mm]</code>:		* <code>losses due to depression storage [mm]</code>:
	: ~~Trough~~ losses of ~~the~~ impervious areas (for further information go to [[Natürliche_Einzugsgebiete#Oberflächenwasservorrat (Versiegelter Flächenanteil) O \| Theory:Surface water reservoirs (fraction of impervious area)]])		: depression storage losses of impervious areas (for further information go to [[Natürliche_Einzugsgebiete#Oberflächenwasservorrat (Versiegelter Flächenanteil) O \| Theory:Surface water reservoirs (fraction of impervious area)]])
	* <code>initial reservoir content [%]</code>:		* <code>initial reservoir content [%]</code>:
	:Refers to the [[BEK-Datei\|BEK-File]], which contains the ~~storm-water~~ overflow ~~basins~~ as well as the rain-water retention basins of the urban drainage system. The initial reservoir content of a dam is configured in the [[TAL-Datei\|TAL-File]].		:Refers to the [[BEK-Datei\|BEK-File]], which contains the stormwater overflow tanks as well as the rain-water retention basins of the urban drainage system. The initial reservoir content of a dam is configured in the [[TAL-Datei\|TAL-File]].
	* <code>initial soil moisture</code>:		* <code>initial soil moisture</code>:
	:Global initial soil moisture, which will be used as the initial soil moisture of each individual HRU [[EZG-Datei\|Catchments]].		:Global initial soil moisture, which will be used as the initial soil moisture of each individual HRU [[EZG-Datei\|Catchments]].

Froehlich: fix syntax highlighting

2013-12-08T13:20:59Z

fix syntax highlighting

← Older revision		Revision as of 06:20, 8 December 2013
Line 4:		Line 4:

	==Datei==		==Datei==
	<bluem ~~lines=true~~>		<source lang="bluem">
	Allgemeine Angaben (.ALL)		Allgemeine Angaben (.ALL)
	*==========================		*==========================
Line 72:		Line 72:
	*-------------		*-------------

	</~~bluem~~>		</source>

	==Translations==		==Translations==

Mkissel: /* Initial conditions */

2013-07-25T08:33:23Z

Initial conditions

← Older revision		Revision as of 01:33, 25 July 2013
Line 116:		Line 116:
	===Initial conditions===		===Initial conditions===
	* <code>losses due to troughs [mm]</code>:		* <code>losses due to troughs [mm]</code>:
	: Trough losses of the impervious ~~ares~~ (for further information go to [[Natürliche_Einzugsgebiete#Oberflächenwasservorrat (Versiegelter Flächenanteil) O \| Theory:Surface water reservoirs (fraction of impervious area)]])		: Trough losses of the impervious areas (for further information go to [[Natürliche_Einzugsgebiete#Oberflächenwasservorrat (Versiegelter Flächenanteil) O \| Theory:Surface water reservoirs (fraction of impervious area)]])
	* <code>initial reservoir content [%]</code>:		* <code>initial reservoir content [%]</code>:
	:Refers to the [[BEK-Datei\|BEK-File]], which contains the ~~rain~~ overflow basins as well as the rain retention basins of the urban drainage system. The initial reservoir content of a dam is configured in the [[TAL-Datei\|TAL-File]].		:Refers to the [[BEK-Datei\|BEK-File]], which contains the storm-water overflow basins as well as the rain-water retention basins of the urban drainage system. The initial reservoir content of a dam is configured in the [[TAL-Datei\|TAL-File]].
	* <code>initial soil moisture</code>:		* <code>initial soil moisture</code>:
	:Global initial soil moisture, which will be used as the initial soil moisture of each individual HRU [[EZG-Datei\|Catchments]].		:Global initial soil moisture, which will be used as the initial soil moisture of each individual HRU [[EZG-Datei\|Catchments]].

Mkissel at 09:55, 27 February 2013

2013-02-27T09:55:04Z

← Older revision		Revision as of 02:55, 27 February 2013
Line 75:		Line 75:

	==Translations==		==Translations==
	In this section you will find the ~~english~~ translation of the ~~german~~ wording used in the example All-File.An Explanation of some of the options can be found in the section '''Explanations''' of this page.		In this section you will find the English translation of the German wording used in the example All-File.An Explanation of some of the options can be found in the section '''Explanations''' of this page.

	===Bezeichnung===		===Bezeichnung===
	* <code> Bezeichnung....: Speicherbewirtschaftung </code> is <code> ~~charaterization~~...: reservoir management</code>		* <code> Bezeichnung....: Speicherbewirtschaftung </code> is <code> characterization...: reservoir management</code>

	===Simulations-Zeitraum===		===Simulations-Zeitraum===
Line 88:		Line 88:

	===Anfangsbedingungen===		===Anfangsbedingungen===
	*<code> Anfangsbedingungen </code> are the <code> ~~inital~~ conditions </code>		*<code> Anfangsbedingungen </code> are the <code> initial conditions </code>

	===Simulationsoptionen===		===Simulationsoptionen===
Line 100:		Line 100:

	===DiffQuellen===		===DiffQuellen===
	* <code> DiffQuellen </code> ~~ist~~ an ~~abriviation~~ of diffuse Quellen and refers to the <code> diffuse sources </code>		* <code> DiffQuellen </code> is an abbreviation of diffuse Quellen and refers to the <code> diffuse sources </code>

	===Erw. Ausgabeoptionen===		===Erw. Ausgabeoptionen===
Line 114:		Line 114:
	:If <code>M</code> is chosen here, the <code>time step duration [min]</code> will be ignored and a (variable) time step of exactly one month will be utilized, which begins at the first of a month and ends with the first of the following month .		:If <code>M</code> is chosen here, the <code>time step duration [min]</code> will be ignored and a (variable) time step of exactly one month will be utilized, which begins at the first of a month and ends with the first of the following month .

	===~~Inital~~ conditions===		===Initial conditions===
	* <code>losses due to troughs [mm]</code>:		* <code>losses due to troughs [mm]</code>:
	: Trough losses of the impervious ares (for further information go to [[Natürliche_Einzugsgebiete#Oberflächenwasservorrat (Versiegelter Flächenanteil) O \| Theory:Surface water reservoirs (fraction of impervious area)]])		: Trough losses of the impervious ares (for further information go to [[Natürliche_Einzugsgebiete#Oberflächenwasservorrat (Versiegelter Flächenanteil) O \| Theory:Surface water reservoirs (fraction of impervious area)]])
Line 138:		Line 138:
	: Log protocol output ([[$LOG.TXT]])		: Log protocol output ([[$LOG.TXT]])
	* <code>LTSTOUT ....................... :</code>		* <code>LTSTOUT ....................... :</code>
	: (Control) output of each step of the ~~simualtion~~ ( which step was completed? Which function was called?)		: (Control) output of each step of the simulation ( which step was completed? Which function was called?)
	* <code>LBFFKT ........................ :</code>		* <code>LBFFKT ........................ :</code>
	: Output of soil funtions for each time increment		: Output of soil funtions for each time increment

Mkissel at 12:48, 25 February 2013

2013-02-25T12:48:30Z

Mkissel at 10:16, 10 January 2013

2013-01-10T10:16:05Z

← Older revision		Revision as of 03:16, 10 January 2013
Line 103:		Line 103:

	===Erw. Ausgabeoptionen===		===Erw. Ausgabeoptionen===
	* <code> Erw. Ausgabeoptionen </code> are <code> ~~further~~ output options </code>		* <code> Erw. Ausgabeoptionen </code> are <code> extended output options </code>


Line 128:		Line 128:
	:By enabling this option the values in the result-files ([[WEL-Datei\|WEL]] and [[KWL-Datei\|KWL]]-Dateien) will be separated by semicolons. This is very useful for Excel!		:By enabling this option the values in the result-files ([[WEL-Datei\|WEL]] and [[KWL-Datei\|KWL]]-Dateien) will be separated by semicolons. This is very useful for Excel!

	===~~Further~~ output options===		===Extended output options===
	* <code>HRU-Discharge wave output (LEFLWELOUT). :</code>		* <code>HRU-Discharge wave output (LEFLWELOUT). :</code>
	: Creates a [[EFL.WEL-Datei]] containing a detailed discharge wave (including soil moisture) for individual HRUs (this option must be enabled for desired HRUs in the [[EFL-Datei]]!)		: Creates a [[EFL.WEL-Datei]] containing a detailed discharge wave (including soil moisture) for individual HRUs (this option must be enabled for desired HRUs in the [[EFL-Datei]]!)

Mkissel: kleine Korrekturen der Übersetzung

2013-01-09T11:08:45Z

kleine Korrekturen der Übersetzung

← Older revision		Revision as of 04:08, 9 January 2013
Line 75:		Line 75:

	==Translations==		==Translations==
	In this section you will find the english translation of the german wording used in the example All-File.~~Explanations~~ of some of the options can be found in the section '''Explanations''' of this page.		In this section you will find the english translation of the german wording used in the example All-File.An Explanation of some of the options can be found in the section '''Explanations''' of this page.

	===Bezeichnung===		===Bezeichnung===
Line 85:		Line 85:

	===Zeitschritt===		===Zeitschritt===
	* <code> Zeitschritt </code> is the <code> ~~Time increment~~ </code>		* <code> Zeitschritt </code> is the <code> time step </code>

	===Anfangsbedingungen===		===Anfangsbedingungen===
	*<code> Anfangsbedingungen </code> are the <code> ~~Inital~~ conditions </code>		*<code> Anfangsbedingungen </code> are the <code> inital conditions </code>

	===Simulationsoptionen===		===Simulationsoptionen===
	*<code> Simulationsoptionen </code> are the <code> ~~Simulation~~ options </code>		*<code> Simulationsoptionen </code> are the <code> simulation options </code>

	===Berechnungsparameter===		===Berechnungsparameter===
	*<code> Berechnungsparameter </code> are the <code> ~~Simulations~~ parameters </code>		*<code> Berechnungsparameter </code> are the <code> simulations parameters </code>

	===Ausgabeoptionen===		===Ausgabeoptionen===
	* <code> Ausgabeoptionen </code> are the <code> ~~Output~~ options </code>		* <code> Ausgabeoptionen </code> are the <code> output options </code>

	===DiffQuellen===		===DiffQuellen===
Line 103:		Line 103:

	===Erw. Ausgabeoptionen===		===Erw. Ausgabeoptionen===
	* <code> Erw. Ausgabeoptionen </code> are <code> ~~Further~~ output options </code>		* <code> Erw. Ausgabeoptionen </code> are <code> further output options </code>



	==Explanations==		==Explanations==
	===Time ~~increment~~===		===Time step===
	* <code>Time ~~increment~~ duration [min]</code>:		* <code>Time step duration [min]</code>:
	:A Value between 1 and 43200 (= 30 days)		:A Value between 1 and 43200 (= 30 days)
	* <code>Time ~~increment~~ month = M</code>:		* <code>Time step month = M</code>:
	:If <code>M</code> is chosen here, the <code>time ~~inrement~~ duration [min]</code> will be ignored and a (variable) time ~~inrement~~ of exactly one month will be utilized, which begins at the first of a month and ends with the first of the following month .		:If <code>M</code> is chosen here, the <code>time step duration [min]</code> will be ignored and a (variable) time step of exactly one month will be utilized, which begins at the first of a month and ends with the first of the following month .

	===Inital conditions===		===Inital conditions===
	* <code>~~Losses~~ due to troughs [mm]</code>:		* <code>losses due to troughs [mm]</code>:
	: Trough losses of the sealed ares (for further information go to [[Natürliche_Einzugsgebiete#Oberflächenwasservorrat (Versiegelter Flächenanteil) O \| Theorie:Oberflächenwasservorrat (Versiegelter Flächenanteil)]])		: Trough losses of the sealed ares (for further information go to [[Natürliche_Einzugsgebiete#Oberflächenwasservorrat (Versiegelter Flächenanteil) O \| Theorie:Oberflächenwasservorrat (Versiegelter Flächenanteil)]])
	* <code>~~Initial~~ reservoir content [%]</code>:		* <code>initial reservoir content [%]</code>:
	:Refers to the [[BEK-Datei]], which contains the rain overflow basins as well as the rain retention basins of the urban drainage system. The initial reservoir content of a dam is configured in the [[TAL-Datei]].		:Refers to the [[BEK-Datei]], which contains the rain overflow basins as well as the rain retention basins of the urban drainage system. The initial reservoir content of a dam is configured in the [[TAL-Datei]].
	* <code>~~Initial~~ soil moisture</code>:		* <code>initial soil moisture</code>:
	:Global initial soil moisture, which will be used as the initial soil moisture of each individual HRU [[EZG-Datei\|Einzugsgebiete]].		:Global initial soil moisture, which will be used as the initial soil moisture of each individual HRU [[EZG-Datei\|Einzugsgebiete]].

Line 131:		Line 131:
	* <code>HRU-Discharge wave output (LEFLWELOUT). :</code>		* <code>HRU-Discharge wave output (LEFLWELOUT). :</code>
	: Creates a [[EFL.WEL-Datei]] containing a detailed discharge wave (including soil moisture) for individual HRUs (this option must be enabled for desired HRUs in the [[EFL-Datei]]!)		: Creates a [[EFL.WEL-Datei]] containing a detailed discharge wave (including soil moisture) for individual HRUs (this option must be enabled for desired HRUs in the [[EFL-Datei]]!)
	* <code>HRU-Soil ~~moisture~~ (LEFLOUT)... :</code>		* <code>HRU-Soil parameters (LEFLOUT)... :</code>
	: Writes the mean soil parameters of the three calculation ~~horizns~~ for each HRU into a [[EFL.TXT-Datei]]		: Writes the mean soil parameters of the three calculation horizons for each HRU into a [[EFL.TXT-Datei]]
	* <code>DIF-Test output (LDIFOUT) ..... :</code>		* <code>DIF-Test output (LDIFOUT) ..... :</code>
	: Creates a debug-report for the calculation including diffuse sources		: Creates a debug-report for the calculation including diffuse sources

Mkissel: Übersetzung

2012-12-21T09:18:57Z

Übersetzung

← Older revision		Revision as of 02:18, 21 December 2012
Line 1:		Line 1:
	{{Eingabedateien}}		{{Eingabedateien}}
	__NOTOC__		__NOTOC__
	<big>~~Allgemeine Angaben~~</big>		<big>General Information</big>

	==Datei==		==Datei==
Line 74:		Line 74:
	</bluem>		</bluem>

	==~~Erläuterung~~==		==Translations==
			In this section you will find the english translation of the german wording used in the example All-File.Explanations of some of the options can be found in the section '''Explanations''' of this page.

			===Bezeichnung===
			* <code> Bezeichnung....: Speicherbewirtschaftung </code> is <code> charaterization...: reservoir management</code>

			===Simulations-Zeitraum===
			* <code> Simulations-Zeitraum </code> is the <code> Simulation-period </code>
			* the date-format needed is day.month.year hour:minute - day.month.year hour:minute

	===Zeitschritt===		===Zeitschritt===
	* <code>Zeitschrittlaenge [min]</code>:		* <code> Zeitschritt </code> is the <code> Time increment </code>
	~~:Ein Wert zwischen 1 und 43200 (= 30 Tage)~~
	* <code>Zeitschritt ~~Monat = M~~</code>:
	~~:Wenn hier~~ <code>M</code> angegeben wird, wird die Option <code>Zeitschrittlaenge [min]</code> ignoriert und es wird ein (variabler) Zeitschritt von genau einem Monat verwendet, der jeweils vom 1. Tag eines Monats bis zum 1. Tag des Folgemonats reicht.

	===Anfangsbedingungen===		===Anfangsbedingungen===
	* <code>~~Muldenverluste [mm]~~</code>:		*<code> Anfangsbedingungen </code> are the <code> Inital conditions </code>
	: Muldenverluste für die versiegelten Flächenanteile (siehe [[Natürliche_Einzugsgebiete#Oberflächenwasservorrat (Versiegelter Flächenanteil) O \| Theorie:Oberflächenwasservorrat (Versiegelter Flächenanteil)]])
	* <code>~~Anfangsbeckenfüllung [%]~~</code>:		===Simulationsoptionen===
	~~:Bezieht sich auf die [[BEK-Datei]], d.h. die Regenüberlauf- und -rückhaltebecken der Stadtentwässerung. Die Anfangsbeckenfüllung der Talsperren wird in der [[TAL-Datei]] eingestellt.~~		*<code> Simulationsoptionen </code> are the <code> Simulation options </code>
	* <code>~~Anfangsbodenfeuchte~~</code>:
	~~:Globale Anfangsbodenfeuchte, die als Faktor für die Anfangsbodenfeuchten der einzelnen [[EZG-Datei\|Einzugsgebiete]] benutzt wird.~~		===Berechnungsparameter===
			*<code> Berechnungsparameter </code> are the <code> Simulations parameters </code>

	===Ausgabeoptionen===		===Ausgabeoptionen===
	* <code>... ~~Wahrscheinlichkeiten~~ [J/N]</code>:		* <code> Ausgabeoptionen </code> are the <code> Output options </code>
	:~~Generiert eine Ergebnisdatei mit Wahrscheinlichkeitsverteilungen~~ ([[PRB-Datei]]). ~~Dies wird nur für Elemente ausgeführt, für die die Ausgabe der Ganglinie~~ ''~~und~~'' ~~der Bilanzen eingestellt ist~~ (~~siehe~~ [[SYS-Datei]]).
	* <code>... CSV-Format [J/N]</code>:		===DiffQuellen===
	:~~Diese Option führt dazu, dass die Werte~~ in ~~den Ergebnis~~-~~Dateien~~ ([[WEL-Datei\|WEL]] ~~und~~ [[KWL-Datei\|KWL]]-Dateien) ~~mit Semikola getrennt wird~~. ~~Nützlich für~~ Excel!		* <code> DiffQuellen </code> ist an abriviation of diffuse Quellen and refers to the <code> diffuse sources </code>

			===Erw. Ausgabeoptionen===
			* <code> Erw. Ausgabeoptionen </code> are <code> Further output options </code>



			==Explanations==
			===Time increment===
			* <code>Time increment duration [min]</code>:
			:A Value between 1 and 43200 (= 30 days)
			* <code>Time increment month = M</code>:
			:If <code>M</code> is chosen here, the <code>time inrement duration [min]</code> will be ignored and a (variable) time inrement of exactly one month will be utilized, which begins at the first of a month and ends with the first of the following month .

			===Inital conditions===
			* <code>Losses due to troughs [mm]</code>:
			: Trough losses of the sealed ares (for further information go to [[Natürliche_Einzugsgebiete#Oberflächenwasservorrat (Versiegelter Flächenanteil) O \| Theorie:Oberflächenwasservorrat (Versiegelter Flächenanteil)]])
			* <code>Initial reservoir content [%]</code>:
			:Refers to the [[BEK-Datei]], which contains the rain overflow basins as well as the rain retention basins of the urban drainage system. The initial reservoir content of a dam is configured in the [[TAL-Datei]].
			* <code>Initial soil moisture</code>:
			:Global initial soil moisture, which will be used as the initial soil moisture of each individual HRU [[EZG-Datei\|Einzugsgebiete]].

			===Output options===
			* <code>... Probabilities [Y/N]</code>:
			:If activated a file will be created containing the probability distribution of the results([[PRB-Datei]]). However this file will only be created for elements for which '''''both''''' the output of the hydrograph and the output of the balance has been activated (for further informatin go to [[SYS-Datei]]).
			* <code>... CSV-Format [Y/N]</code>:
			:By enabling this option the values in the result-files ([[WEL-Datei\|WEL]] and [[KWL-Datei\|KWL]]-Dateien) will be separated by semicolons. This is very useful for Excel!

	===~~Erweiterte Ausgabeoptionen~~===		===Further output options===
	* <code>~~EFL~~-~~Wellenausgabe~~ (LEFLWELOUT). :</code>		* <code>HRU-Discharge wave output (LEFLWELOUT). :</code>
	: ~~Generiert eine~~ [[EFL.WEL-Datei]] ~~mit detaillierter Wellenausgabe~~ (~~inkl. Bodenfeuchte~~) ~~für einzelne Elementarflächen~~ (~~muss für jeweilige EFLs auch~~ in ~~der~~ [[EFL-Datei]] ~~eingeschaltet sein~~!)		: Creates a [[EFL.WEL-Datei]] containing a detailed discharge wave (including soil moisture) for individual HRUs (this option must be enabled for desired HRUs in the [[EFL-Datei]]!)
	* <code>~~EFL~~-~~Bodenkennwerte~~ (LEFLOUT)... :</code>		* <code>HRU-Soil moisture (LEFLOUT)... :</code>
	: ~~Gibt die gemittelten Bodenkennwerte der drei Berechnungsschichten für jede EFL in einer~~ [[EFL.TXT-Datei]] ~~aus~~		: Writes the mean soil parameters of the three calculation horizns for each HRU into a [[EFL.TXT-Datei]]
	* <code>DIF-~~Testausgabe~~ (LDIFOUT) ..... :</code>		* <code>DIF-Test output (LDIFOUT) ..... :</code>
	: ~~Erstellt eine Debugausgabe für die Rechnung mit diffusen Quellen~~		: Creates a debug-report for the calculation including diffuse sources
	* <code>Protokollausgabe (LLOGOUT) .... :</code>		* <code>Protokollausgabe (LLOGOUT) .... :</code>
	: ~~Ausgabe einer Protokolldatei~~ ([[$LOG.TXT]])		: Log protocol output ([[$LOG.TXT]])
	* <code>LTSTOUT ....................... :</code>		* <code>LTSTOUT ....................... :</code>
	: (~~Kontroll~~)~~Ausgabe der einzelnen Schritte der Simulation~~ (~~Welcher Schritt wurde abgearbeitet~~?~~/Welche Funktion (Routine) wurde aufgerufen~~?)		: (Control) output of each step of the simualtion ( which step was completed? Which function was called?)
	* <code>LBFFKT ........................ :</code>		* <code>LBFFKT ........................ :</code>
	* Ausgabe der Bodenfunktionen je Zeitschritt		: Output of soil funtions for each time increment
	* <code>LBFOUT ........................ :</code>		* <code>LBFOUT ........................ :</code>
	: ~~Alte Debugausgabe der Bodenfeuchte~~, ~~jetzt besser~~ in LEFLWELOUT ~~und~~ LEFLOUT		: Old debug-output for soil moisture, contained and improved in LEFLWELOUT and LEFLOUT

	[[Kategorie:BlueM Eingabedateien]]		[[Kategorie:BlueM Eingabedateien]]

← Older revision		Revision as of 05:48, 25 February 2013
Line 116:		Line 116:
	===Inital conditions===		===Inital conditions===
	* <code>losses due to troughs [mm]</code>:		* <code>losses due to troughs [mm]</code>:
	: Trough losses of the ~~sealed~~ ares (for further information go to [[Natürliche_Einzugsgebiete#Oberflächenwasservorrat (Versiegelter Flächenanteil) O \| ~~Theorie~~:~~Oberflächenwasservorrat~~ (~~Versiegelter Flächenanteil~~)]])		: Trough losses of the impervious ares (for further information go to [[Natürliche_Einzugsgebiete#Oberflächenwasservorrat (Versiegelter Flächenanteil) O \| Theory:Surface water reservoirs (fraction of impervious area)]])
	* <code>initial reservoir content [%]</code>:		* <code>initial reservoir content [%]</code>:
	:Refers to the [[BEK-Datei]], which contains the rain overflow basins as well as the rain retention basins of the urban drainage system. The initial reservoir content of a dam is configured in the [[TAL-Datei]].		:Refers to the [[BEK-Datei\|BEK-File]], which contains the rain overflow basins as well as the rain retention basins of the urban drainage system. The initial reservoir content of a dam is configured in the [[TAL-Datei\|TAL-File]].
	* <code>initial soil moisture</code>:		* <code>initial soil moisture</code>:
	:Global initial soil moisture, which will be used as the initial soil moisture of each individual HRU [[EZG-Datei\|~~Einzugsgebiete~~]].		:Global initial soil moisture, which will be used as the initial soil moisture of each individual HRU [[EZG-Datei\|Catchments]].

	===Output options===		===Output options===
	* <code>... Probabilities [Y/N]</code>:		* <code>... Probabilities [Y/N]</code>:
	:If activated a file will be created containing the probability distribution of the results([[PRB-Datei]]). However this file will only be created for elements for which '''''both''''' the output of the hydrograph and the output of the balance has been activated (~~for further informatin go~~ to [[SYS-Datei]]).		:If activated a file will be created containing the probability distribution of the results([[PRB-Datei]]). However this file will only be created for elements for which '''''both''''' the output of the hydrograph and the output of the balance has been activated (refer to [[SYS-Datei\| SYS-File]]).
	* <code>... CSV-Format [Y/N]</code>:		* <code>... CSV-Format [Y/N]</code>:
	:By enabling this option the values in the result-files ([[WEL-Datei\|WEL]] and [[KWL-Datei\|KWL]]-~~Dateien~~) will be separated by semicolons. This is very useful for Excel!		:By enabling this option the values in the result-files ([[WEL-Datei\|WEL]] and [[KWL-Datei\|KWL]]-Files) will be separated by semicolons. This is very useful for Excel!

	===Extended output options===		===Extended output options===
	* <code>HRU-Discharge wave output (LEFLWELOUT). :</code>		* <code>HRU-Discharge wave output (LEFLWELOUT). :</code>
	: Creates a [[EFL.WEL-Datei]] containing a detailed discharge wave (including soil moisture) for individual HRUs (this option must be enabled for desired HRUs in the [[EFL-Datei]]!)		: Creates a [[EFL.WEL-Datei\|EFL.WEL-File]] containing a detailed discharge wave (including soil moisture) for individual HRUs (this option must be enabled for desired HRUs in the [[EFL-Datei\|EFL-File]]!)
	* <code>HRU-Soil parameters (LEFLOUT)... :</code>		* <code>HRU-Soil parameters (LEFLOUT)... :</code>
	: Writes the mean soil parameters of the three calculation horizons for each HRU into a [[EFL.TXT-Datei]]		: Writes the mean soil parameters of the three calculation horizons for each HRU into a [[EFL.TXT-Datei\|EFL.TXT-File]]
	* <code>DIF-Test output (LDIFOUT) ..... :</code>		* <code>DIF-Test output (LDIFOUT) ..... :</code>
	: Creates a debug-report for the calculation including diffuse sources		: Creates a debug-report for the calculation including diffuse sources